Extension Table Bracket

Description

Why an Extension Table Bracket is Important

Think of this bracket as a structural adapter. Williams & Hussey molders are compact, and their stands are designed with a specific footprint. The extension tables (flat or roller) cannot bolt directly to the cast iron body of the molder because there isn’t a mating surface there.

This bracket bolts to your machine stand and creates a new, heavy-duty mounting face. It provides the “shoulder” that the extension table rests on.

The Extension Table Bracket is a required part for connecting Flat or Roller Extension Tables to your Williams & Hussey Molder. Whether you’re looking to increase infeed and outfeed support or improve material handling with roller tables, this bracket provides the solid, adjustable link between your machine and the extension tables.

Constructed from heavy-duty, powder-coated steel, the bracket features elongated slots that facilitate straightforward installation and alignment. It keeps your extension tables stable and secures tehm during operation. This stability is an important factor in achieving smooth and accurate molding results.

Key Features

Built for Stability and Precision

• Required for use with both flat and roller extension tables
• Provides a secure link between extension tables and molder
• Precision-cut, elongated slots for easy alignment and installation

Durable Construction

• Heavy-duty steel construction
• Powder-coated finish for long-term rust resistance
• Designed for vibration resistance during operation

Compatibility

These extension tables and the bracket used to install them are compatible with any current Williams & Hussey Molder model and the redesigned stand. If your setup includes an older stand, you will need to order the redesigned stand when purchasing extension tables.

Key Benefits for the Woodworker

1. Precision Alignment (The “Elongated Slots”)

The description mentions “precision-cut, elongated slots.” This is the most critical feature for a craftsman.

• The Problem: In molding, if your extension table is even 1/32″ higher or lower than the machine bed, the wood will “bump” as it enters or exits. This bump causes the cutter to dig in, ruining the profile.
• The Benefit: The elongated slots on the extension table bracket allow you to slide the bracket up and down by tiny fractions of an inch before tightening it. This lets you get the extension table dead flat (coplanar) with the machine bed. This micro-adjustability is what guarantees a seamless feed.

2. Vibration Isolation

• The Problem: If you were to rig up a homemade support (like a sawhorse) for your infeed, it would likely vibrate independently of the machine.
• The Benefit: By bolting the table rigidly to the machine stand using this heavy-duty steel bracket, the table and the machine vibrate as one solid unit. This eliminates “harmonic vibration” that can cause chatter marks (ripples) on your molding.

3. Safety and “Locked-In” Stability

• The Problem: A loose infeed table can shift left or right while you are feeding a heavy 16-foot oak board. If the table shifts, the board twists, and the molding profile comes out crooked.
• The Benefit: This extension table bracket locks the table completely in place. It prevents lateral (side-to-side) movement, ensuring that your “runway” is always perfectly straight.

Why You Need It

The Extension Table Bracket is required for any shop expanding its molder’s capacity with infeed or outfeed tables. It guarantees a professional and secure installation, making it a must-have for achieving smooth, consistent results when working with long or heavy stock.

Need Assistance or Have a Question?

Williams & Hussey is here to help you find the right molding knife profile for your molder and are happy to answer your questions about any of our products.