Products
-
154 W&H Molder
Feed Type: 15 fpm, constant feed Knife Motor: 2 HP (3450 rpm) Voltage: 240V Phase: 1 Machine Base: Steel Construction with levelers
28”L x 22”W x 33”H Package Weight: 218 lbs 6900 rpm Arbor (model 154 & 206)
Maximum Profile Depth ¾” Minimum Stock Length 9” Maximum Profile Width 6 ¾” Minimum Stock Thickness ¼”
Maximum Height Above Final Cut 3⁄16”
Maximum Stock Thickness 8”
Planes 7” Wide Overall Machine Dimensions: 28”L x 22”W x 50”H Working Height: 35”
$1,995.00
-
206 W&H Molder - 1 Phase
Feed Type: 0-19 fpm, variable feed Knife Motor: 2 HP (3450 rpm) Voltage: 240V Phase: 1 Machine Base: Steel Construction with levelers
28”L x 22”W x 33”H Guide System:
22”L x 11 ¾”W x ½”H, HDPE Package Weight: 218 lbs 6900 rpm Arbor (model 154 & 206)
Maximum Profile Depth ¾” Minimum Stock Length 9” Maximum Profile Width 6 ¾” Minimum Stock Thickness ¼”
Maximum Height Above Final Cut 3⁄16”
Maximum Stock Thickness 8”
Planes 7” Wide Overall Machine Dimensions: 28”L x 22”W x 50”H Working Height: 35”
$2,795.00
-
206 W&H Molder - 3 Phase
Feed Type: 0-19 fpm, variable feed Knife Motor: 2 HP (3450 rpm) Voltage: 240V Phase: 3 Machine Base: Steel Construction with levelers
28”L x 22”W x 33”H Guide System:
22”L x 11 ¾”W x ½”H, HDPE Package Weight: 218 lbs 6900 rpm Arbor (model 154 & 206)
Maximum Profile Depth ¾” Minimum Stock Length 9” Maximum Profile Width 6 ¾” Minimum Stock Thickness ¼”
Maximum Height Above Final Cut 3⁄16”
Maximum Stock Thickness 8”
Planes 7” Wide Overall Machine Dimensions: 28”L x 22”W x 50”H Working Height: 35”
$2,795.00
-
209 W&H Molder
Feed Type: 0-19 fpm, variable feed Knife Motor: 1 ½” HP (3480 rpm) Voltage: 115V (20 amp required) Phase: 1 Machine Base: Steel Construction with levelers
28”L x 22”W x 33”H Guide System:
22”L x 11 ¾”W x ½”H, HDPE Package Weight: 210 lbs 6900 rpm Arbor (model 154 & 206)
Maximum Profile Depth ¾” Minimum Stock Length 9” Maximum Profile Width 6 ¾” Minimum Stock Thickness ¼”
Maximum Height Above Final Cut 3⁄16”
Maximum Stock Thickness 8”
Planes 7” Wide Overall Machine Dimensions: 28”L x 22”W x 50”H Working Height: 35” $2,495.00
-
Astragals - 2350
Dimensions: ¾” x 1 ¾” – Eased Step
Astragal cutters can also be used to make nose and cove moldings simply by aligning the stock.
BOLD LINES REPRESENT CUTTING PROFILE AS VIEWED FROM INFEED.
$80.00
-
Astragals - 2351
Dimensions: ¾” x 1 ¾” – Sharp Step
Astragal cutters can also be used to make nose and cove moldings simply by aligning the stock.
BOLD LINES REPRESENT CUTTING PROFILE AS VIEWED FROM INFEED.
$100.00
-
Astragals - 2352
Dimensions: ⅜” x 11⁄16”
Astragal cutters can also be used to make nose and cove moldings simply by aligning the stock.
BOLD LINES REPRESENT CUTTING PROFILE AS VIEWED FROM INFEED.
$90.00
-
Astragals - 9435
Dimensions: ¼” x 1 ¾”
BOLD LINES REPRESENT CUTTING PROFILE AS VIEWED FROM INFEED.$165.00
-
Astragals - 9436
Dimensions: ¼” x ⅝”
BOLD LINES REPRESENT CUTTING PROFILE AS VIEWED FROM INFEED.$120.00
